Miscellaneous Horizontal Baler Options

• VOLTAGE OPTIONS. All through 10HP are tri-volt ready for  208 240 or 480 Volt power. All above 10HP are wired only for 480 V. operation unless an upcharge is added as follows (per motor):
  • Optional voltage upcharge per motor for 15HP (standard=480 V.)
  • Optional voltage upcharge per motor for 20HP (standard=480 V.)
  • Optional voltage upcharge per motor for 25HP (standard=480 V.)
  • Optional voltage upcharge per motor for 30HP (standard=480 V.)
  • Optional voltage upcharge per motor for 40HP (standard=480 V.)
  • Optional voltage upcharge per motor for 50HP (standard=480 V.)
  • Optional voltage upcharge per motor for 60HP (standard=480 V.)
  • Optional voltage upcharge per motor for 75HP (standard=480 V.)
• Oil-to-air cooling system thermostatically controlled recommended for
  • up to 25 HP
  • for 25 to 60 HP
  • for over 60 HP
• Upcharge from standard open-loop to closed-loop cooling system
• Oil heater immersion type
  • 1500 Watt (requires separate power)
  •  3000 Watt (requires separate power)
• Three-position retract limit (1/3 2/3 full)
• Single-head 10HP fluffer interfaced with baler controls swing-away manual door
• Double-head (10HP x2) fluffer interfaced with baler controls swing-away manual door
• Hydraulically powered swing-away doors hoods diverter plates
• Liquid clutch (per head)
• Fused disconnect options integral with power box (per motor):
  • Fused disconnect on power box -- for 5 HP 3Ø
  • Fused disconnect on power box -- for 10 HP 3Ø
  • Fused disconnect on power box -- for 15 HP 3Ø
  • Fused disconnect on power box -- for 20 HP 3Ø
  • Fused disconnect on power box -- for 25 HP 3Ø
  • Fused disconnect on power box -- for 30 HP 3Ø
  • Fused disconnect on power box -- for 40 HP 3Ø
  • Fused disconnect on power box -- for 50 HP 3Ø
  • Fused disconnect on power box -- for 60 HP 3Ø
  • Fused disconnect on power box -- for 75 HP 3Ø (**not available for 208 V.)
• Extra emergency STOP button
• Extra safety limit switch